Work Equipment Risk Assessment - Controls (page 1 of 2)
Page 5 of 7
Please allow a few seconds for the check sheet to load. Once completed you have the options to e-mail or print the assessment.
List of typical risk assessment questions around the Controls (page 1 of 2).
Risk Assessment Questions Cover:
Controls (part 1 of 2)
•Is the control system designed so as not to increase the risk to the operator or equipment safety?
•Is equipment provided with start, stop and/or level controls that are clearly visible and require deliberate action to operate?
•Are controls without modification / adaption?
•Are controls readily accessible?
•Are all controls outside any danger zone?
•Are controls positioned so as to prevent inadvertent operation?
•Are controls shrouded or do they have a lock-off facility?
Note: We do not store your risk assessment, once you close the form the data is removed. If, you wish to keep a record of your data input, please print (WYSIWYG) or e-mail (data) the completed form.
Page 1 - Section 1 - Suitability
Page 2 - Section 2 - Maintenance
Page 3 - Section 3 - Restrictions, Section 4 - Guards and Section 5 - Effects of Temperature
Page 4 - Section 6 - Specific Hazards
Page 6 - Section 7 - Controls (page 2 of 2)
Page 7 - Section 8 - Miscellaneous
Page 5 - Section 7 - Controls (page 1 of 2)
On Safe Lines QHSE Software Help file v1.071.0092 : Copyright © 2018 Brian G. Welch MSc(QHSE), NVQ4(OH&S), CMIOSH
FREE H&S Risk Assessment Software
click <here> to learn more